NEED LOWER VOLUMES?
This may be better than 3D printing.
SUPERMOLD V1.0
PART FITS IN 2" X 2" dia. cylinder
with 1000 finished parts and a
CLASS 103 Steel Mold with a
Lifetime warranty on mold.
Material Cost Extra - MIM or Plastic
SUPERMOLD V1.0
Your part fits in a 2" X 2" dia. cylinder
and includes 1000 molded parts plus a
CLASS 103 steel mold with a lifetime warranty on the mold.
Material cost is extra - MIM or Plastic
SUPERMOLD V2.0
Your part fits in a 5" X 5" x 2" space and comes with 1000 molded parts plus a CLASS 103 steel mold with a lifetime warranty on the mold.
Material cost is extra - MIM or Plastic
Proudly made in Lafayette, Louisiana
Get into production quicker and for a smaller investment up front
Go from purchase order to first article in 10 days with SuperMold™!
When you 3D print you are spending prototype dollars. Money that will never translate to production budgets.
SUPERMOLD accelerates your timeline by using your prototype dollars on making a production mold designed to take advantage of production efficiencies.
SUPERMOLD uses 103 tool steel to provide a production mold that is guaranteed for as long as you need parts. Our full tool shop allows quick turnaround to put parts in your hand when needed, at a cost effective price point.
Reduce costs and lead times for custom injection molds to process thermoplastic or metal components.
At ASH Industries we are always looking for ways to help you get real parts into your hands rather than waste money on 3D printing
(Parts must have a maximum 3/16” wall thickness, +-0.005” (0.127mm) tolerances and not have any undercuts. The molds must be “open & shut”).
.png)
10 DAY LEAD TIME
-
Your part fits in a 2” X 2” diameter cylinder
-
1000 molded parts
-
Class 103 Mold with a lifetime MOLD Guarantee
-
Your choice of material and secondary operations is additional cost. MIM Parts require additional lead time for sintering.
SUPERMOLD V1.OS
$8500
10 DAY LEAD TIME
-
Your part fits in a 2” X 2” diameter cylinder with undercut up to .050" Slide
-
1000 molded parts
-
Class 103 Mold with a lifetime MOLD Guarantee
-
Your choice of material and secondary operations is additional cost. MIM Parts require additional lead time for sintering.
SUPERMOLD V1.0F
$7900
3 WEEK LEAD TIME
-
Your part fits in a 2” X 2” diameter cylinder with two parts that fit in a 1+1 cavity family mold
-
1000 molded parts
-
Class 103 Mold with a lifetime MOLD Guarantee
-
Your choice of material and secondary operations is additional cost. MIM Parts require additional lead time for sintering.
SUPERMOLD V2.0
$7400
3 WEEK LEAD TIME
-
Your part fits in a 5" x5" x 2" rectangle space
-
1000 molded parts
-
Class 103 Mold with a lifetime MOLD Guarantee
-
Your choice of material and secondary operations is additional cost. MIM Parts require additional lead time for sintering.
*Limitations: Parts must have a maximum 3/16” wall thickness, +-0.005” (0.127mm) tolerances and not have any undercuts. The molds must be “open & shut”. See ASH for exceptions to the configuration limitations. If you need a more customized spec, please contact us. The price(s) above does not include plastic, MIM, or silicone materials. MIM lead times will be longer to account for sintering. In order to give the customer as much flexibility as possible, ASH Industries encourages customers to pick a material ideal to meet customer requirements. Customer has the option of providing their own plastic. Further information will be needed for estimating customer manufacturing costs that includes materials. Please contact ASH Industries if you have any concerns or questions.
In manufacturing, all three terms - short run, low volume, and prototype - are used to describe production quantities, but with slightly different nuances:
-
Short Run: This term emphasizes the time aspect of production. A short run typically refers to a smaller than usual production batch that needs to be completed quickly. This could be to meet a sudden surge in demand, fulfill a pilot order, or bridge a gap in production while waiting for larger batches.
-
Low Volume: This term focuses on the quantity of parts being produced. Low volume refers to a relatively small number of parts compared to typical production runs for that particular product. It doesn't necessarily imply a tight deadline, although it could be the case.
-
Prototype: This refers to a first or early example of a product created to test its design, functionality, and performance. Prototypes are typically produced in very small quantities, often just one or a few, and are not intended for final use or sale.
Need ISO Medical Mold Qualification for your 1000 parts?
We now can make short run medical quality parts in the SUPERMOLD PROGRAM.
ASH FACTS:
-
Thermoplastic Injection Molding
-
Rotomolding
-
Tool & Die manufacturing
-
Silicone Molding
-
3D Printing Production
-
Design for Manufacturing (DFM)
-
Low volume 3D production
-
3D Plastic Printing
-
Metal Injection Molding
-
Yes, ASH can help you manufacture your parts in low volume. We can even 3D print your first prototypes. When you want to have less than 1000 but don't want to pay for full production runs we have a flat rate low volume program called SUPERMOLD. This can have many benefits, including a faster time to market and a low initial investment but still allow you to produce high-quality parts.
.jpg)
Of course NDA's are necessary to protect your IP. We value privacy and confidentiality and that is one of your main reasons for making parts in the USA. NDA's are enforceable here unlike sourcing overseas. Confidentiality is one of the most important factors in choosing a new molding supplier.
We are ISO 9001 compliant and ISO 13485 with a ISO Class 7 medical cleanroom.
Yes we do, besides our founder graduating from Massachusetts Institute of Technology with a degree in 6-1, Electrical Engineering-Hardware, we also have a biomedical engineer, mechanical engineers and other manufacturing engineers on staff to help you think smarter to save money.
10 -day Turnaround*
-
Mold + 1000 parts
-
Each Part fits in A 2”X2” diameter cylinder
-
Class 103 Mold
-
Lifetime MOLD Guarantee
-
Your choice of plastic or MIM Material cost is additional*
$7900
SUPERMOLD 2
3 Week Lead Time*
-
2 Part family mold
-
Mold + 1000 parts
-
Each Part fits in a 2”X2” diameter cylinder
-
Class 103 Mold
-
Lifetime MOLD Guarantee
-
Your choice of plastic or MIM Material cost is additional*
$8500
SUPERMOLD 3
2 Week Lead Time*
-
Up to 0.50” Slide
-
Mold + 1000 parts
-
Each Part fits in a 2”X2” diameter cylinder
-
Class 103 Mold
-
Lifetime MOLD Guarantee
-
Your choice of plastic or MIM Material cost is additional*
$7400
SUPERMOLD XL
3 Week Lead Time*
-
Mold + 1000 parts
-
Each Part fits in a 5"x5"x2" rectangle
-
Class 103 Mold
-
Lifetime MOLD Guarantee
-
Your choice of Plastic or MIM. Material cost is additional*
10 -day Turnaround*
-
Mold + 1000 parts
-
Each Part fits in A 2”X2” diameter cylinder
-
Class 103 Mold
-
Lifetime MOLD Guarantee
-
Your choice of plastic or MIM Material cost is additional*
$7900
SUPERMOLD 2
3 Week Lead Time*
-
2 Part family mold
-
Mold + 1000 parts
-
Each Part fits in a 2”X2” diameter cylinder
-
Class 103 Mold
-
Lifetime MOLD Guarantee
-
Your choice of plastic or MIM Material cost is additional*
$8500
SUPERMOLD 3
2 Week Lead Time*
-
Up to 0.50” Slide
-
Mold + 1000 parts
-
Each Part fits in a 2”X2” diameter cylinder
-
Class 103 Mold
-
Lifetime MOLD Guarantee
-
Your choice of plastic or MIM Material cost is additional*
$7400
SUPERMOLD XL
3 Week Lead Time*
-
Mold + 1000 parts
-
Each Part fits in a 5"x5"x2" rectangle
-
Class 103 Mold
-
Lifetime MOLD Guarantee
-
Your choice of Plastic or MIM. Material cost is additional*
SUPERMOLD V2.0
PART FITS IN 5" X 5" x 2" Space with 1000 finished parts and a CLASS 103 Steel Mold with a lifetime warranty on the mold.
Material Cost Extra - MIM or Plastic
Proudly made in Lafayette, Louisiana
Get into production quicker and for a smaller investment up front
Go from purchase order to first article in 10 days with SuperMold™!
When you 3D print you are spending prototype dollars. Money that will never translate to production budgets.
SUPERMOLD™ accelerates your timeline by using your prototype dollars on making a production mold designed to take advantage of production efficiencies.
SUPERMOLD uses 103 tool steel to provide a production mold that is guaranteed for as long as you need parts. Our full tool shop allows quick turnaround to put parts in your hand when needed, at a cost effective price point.
Reduce costs and lead times for custom injection molds to process thermoplastic or metal components.
At ASH Industries we are always looking for ways to help you get real parts into your hands rather than waste money on 3D printing
(Parts must have a maximum 3/16” wall thickness, +-0.005” (0.127mm) tolerances and not have any undercuts. The molds must be “open & shut”).
10 DAY LEAD TIME*
-
Mold + 1000 molded parts
-
Your part fits in A 2” X 2” diameter cylinder
-
Class 103 Mold with a lifetime guarantee
-
Your choice of plastic or MIM material cost is additional*
-
Your choice of material and secondary operations is additional cost. MIM Parts require additional lead time for sintering.
$8500
SUPERMOLD V1.0S
10 DAY LEAD TIME*
-
Mold + 1000 molded parts
-
Your part fits in a 2” X 2” diameter cylinder
-
with undercut up to .050" slide
-
Class 103 Mold with a lifetime Guarantee
-
Your choice of material and secondary operations is additional cost. MIM Parts require additional lead time for sintering.
$7900
SUPERMOLD V1.0F
3 WEEK LEAD TIME
-
Mold + 1000 molded parts
-
Your part fits in a 2”X2” diameter cylinder
-
and has two parts that go into a 1+1 cavity family mold
-
Class 103 Mold with Lifetime MOLD Guarantee
-
Your choice of material and secondary operations is additional cost. MIM Parts require additional lead time for sintering.
$7400
SUPERMOLD V2.0
3 WEEK LEAD TIME
-
Mold + 1000 molded parts
-
Your part fits in a 5" x5" x 2" rectangle
-
Class 103 Mold with a lifetime MOLD Guarantee
-
Your choice of material and secondary operations is additional cost. MIM Parts require additional lead time for sintering.
Need ISO Medical Mold Qualification for your 1000 parts?
We now can make short run medical quality parts in the SUPERMOLD PROGRAM.